JVC-Grayscale Display MS 25i2

2 MP - 21,3" highbrightness greyscale LCD

TOTOKU-Grayscale Display MS 25i2 - 2 MP - 21,3" highbrightness greyscale LCD

JVC MS 25i2

JVC introduces the new, affordable MS 25i2, a unique display that achieves 6M ISD resolution, utilizing a 2MP panel and our unique subpixel-drive technology. By utilizing our revolutionary subpixel drive technology, the MS 25i2 provides comparatively the same resolution as a 6 MP display, without the extra costs typically associated with higher resolution displays.


Angio  CT / MR




ISD, Independent Sub-pixel Drive, ISD-Technologie


ISD (Independent Sub-pixel Drive) technology allows the sub-pixels of greyscale displays to be controlled independently of each other. This is a revolution for diagnostic monitors as it allows the resolution of a display to be tripled. For example, ISD turns a 2 MP display into a 6 MP display. ISD provides substantial cost savings while improving quality.



Three different sensors permanently monitor the status of i2 models.

Integrierte Lut, 13,6 Bit LUT

Look up table

The built-in LUT selects the most appropriate 256 shades of gray (8bit) out of 1021 shades (10bit) to realize finer and smoother grayscale.



With the JVC Software solutions and remote management you become the QA expert. The Medivisor suite makes calibration and testing as simple as possible. With PM Medivisor you enleash the full remote functionality.
All remote features are so advanced that you don't even get noticed. The integrated front sensor checks constantly the image quality. This data is send to the server and avaiable by a webinterface you can access from any workstation.

Uniformity Equalizer


The uniformity equalizer ensures excellent brightness distribution over the entire display surface and even eliminates minimal fluctuations in luminance. In the case of colour monitors, the uniformity equalizer also provides an even distribution of colours over the entire screen


DICOM preset - for improved perception

The display come with a correction curve, which is stored as DICOM preset and can be activated via the menu. The image quality is thereby noticeably improved.

More about DICOM preset

LED Backlight

LED Backlight

The latest generation of JVC monitors is equipped with an LED backlight. The LED backlight ensures a better and more consistent illumination of the entire display in the CCL 258i2, CCL 358i2, CCL 650i2 and MS55i2 models. The power consumption of these monitors is also reduced by around 20% compared to models with conventional lighting. 

Eco-frindly, LED-Backlight, Umweltfreundlich, Energy saving


LEDs contain no mercury or other harmful elements. This makes disposal easy.



Dreifarbige LED-Anzeige, LED Signal, LED Status

Tricolor LED indicator

A glance at the LED indicator tells you the display's current operating status in three distinct colors. When in normal mode (luminance is stabilized), the LED is not lighted to minimize negatively impacting the diagnostic interpretation.


Pivot-Funktion, Landscape, Portrait,

Hardware Pivot Funktion

The pivot function of a monitor allows you to rotate the screen by 90° in order to switch from portrait mode to landscape format. This rotation requires that the respective screen format on the computer is converted (for example, from 1920 x 1200 to 1200 x 1920). Many monitors offer a software solution for this. However, the solution usually requires a lot of computing power and slows down the display of images. In the hardware pivot function featured in Totoku monitors, the display of images is equally fast in both modes and responds to changes of mode at lightning speed.

Zertifiziert, EN 60601-1, EN 60601-1-2, certified


Security certified according to the EN 60601-1 and EN 60601-1-2 standards.

Technical Data

Technical Data - JVC MS 25i2

Application Good image reproduction by ISD. Cost-effective diagnostic monitor.
Technology TFT grayscale IPS technology
IPS (Independent Sup pixels) Yes
LED backlight Yes
Display size 21.3 "(54 cm)
Resolution (native) 1200 x 1600 (2 MP)
Resolution via the ISD (subpixel) 1200 x 4800 (5.8 MP)
Pixel spacing 0,270 mm x 0,270 mm
Maximum displayable gray levels (LUT) 13.6 bits, 12241 grayscale
Simultaneously displayable gray levels (DVI) 11 Bit 2048 Graustufen without ISD / 10,3 Bit 1276 Graustufen with ISD
Maximum brightness 1900 cd / m²
Factory calibration 410 cd / m²
Contrast ratio 1400:1
Angle h: 170 ° / V: 170 °
Stabilization l-Sentinel II (integrated sensors)
Life backlight 30.000 h / 300 cd/m2
Protective glass Yes
Portrait function Yes
Signal inputs DVI-D (1.0), DisplayPort (1.1a)
USB Hub USB 2.0, 1x up / down 2x
General unit data
Power consumption 60 W
Power saving mode Yes
Power supply 100 - 240 V, 50/60 Hz internal power supply
Dimensions in landscape mode W: 474 | H: 468,4 - 529,9 | D: 220
Dimensions in portrait mode W: 367 | H: 521,9 -583,4 | D: 220
Attachment 100mm VESA standard
Security lock slot Yes
Weight with stand approximately 12 kg
Weight without stand 7.8 kg
Approvals CE, UL1950, EN60950 CSA950, DHHS, FCC-A, IEC950 UL2601, CSA601 IEC601-1, TCO-95, IEC601-1-2, TUV-GM, UL60601-1, CSA C22.2 No. 601.1, MDD/ CE, FCC-B, VCCI-B, RoHS, FDA510(k), CCC pending
Warranty (bring-in) 5 years
Remote calibration With software JVC PM Medivisor (optional)
Uniformity Correction Factory Uniformity Correction possible before delivery New correction with calibration kit CAL008 (optional)


tiltable Tabletopadjustable standHeight adjustable standTOTOKU MS 23i2 in portrait modeTOTOKU MS 23i2 portrait sideTOTOKU MS 23i2 side view in portrait modeSide view in Landscape modeTOTOKU MS 23i2 back of

You would like to get detailed information? More about the Free Info Package.


Test the JVC diagnistic display in your environment

We would be glad to present you the JVC diagnistic display on location. Further you have the opportunity to run the devices in your daily clinic routine during a test phase.