TOTOKU ME 213L - discontinued
2 MP display for diagnostic imaging
By means of the Lambda-X3 backlight technology by TOTOKU the ME 213L gains a clearly higher luminance and longer life time. The very high luminance of 1500 cd/m² provides best picture quality even at poor lighting conditions.
This diagnostic monitor with a resolution of 2 megapixels and an integrated dual interface (analog/digital) is perfectly fit to the requirements of various viewing options.
Due to the integrated calibration function and the 10-bit LUT (Look-Up Table) which is stored in the monitor the display of grayscales according to DICOM DGSF is ideally performed.
Product Features
- 21.3" grayscale monitor
- resolution: 1200x1600 / 2 megapixels
- Lambda X3 backlight
- luminance stabilization Sentinel-1
- luminance: 1500 cd/m²
- contrast ratio: 700:1
| Display Size | 21.3" (54 cm) |
| Surface | antireflection-coated, Front-Protected |
| Backlight Technology | Lambda-X3 |
| Life Time Backlight MTBF | > 100.000 |
| Stabilization Circuit | Lambda-Sentinel I |
| Portrait Function | yes |
| Display Area | 432 mm x 324 mm |
| Pixel Pitch | 0.270 mm x 0.270 mm |
| Resolution (max.) | PT 1200 x 1600, LS 1600 x 1200 |
| Grayscale | 8-bit |
| LUT (Look Up Table) | True 10-bit |
| Grayscale Spectrum | 256 |
| Viewing Angle | h: 170° / v: 170° |
| Brightness | 1500 cd/m² |
| Contrast Ratio | 700:1 |
| Signal Inputs | DVI-D (digital), RGB (analog) |
| Scanning Frequencies | horizontal 30-92 kHz, vertical 50-90 Hz |
| USB Hub | 1 up / 2 down |
| Power Supply | AC adapter 100 - 240V 50/60Hz |
| Power Consumption | 60 W / incl. Power Save Mode |
| Plug and Play | DDC2B compliant |
| Dimensions (WxHxD) mm | PT 367 x 522 x 220, LS 474 x 468 x 220 |
| Weight | 11.5 kg |
| Approvals | CE, UL1950, CSA950 EN60950, DHHS,FCC-A, IEC950 UL2601, CSA601 IEC601-1,TCO-95, IEC601-1-2, TÜV-GM |
| DICOM Compliant | DICOM 3.0 Part 14 |
| Warranty | 5 years (LCD Panel) / 5 years (Backlight) |
