TOTOKU-Color Display CCL 650i2

6 MP - 30" highbrightness LED Color LCD

Description
TOTOKU-Display CCL 650i2 - 6 MP - 30" highbrightness LED Color LCD

TOTOKU CCL 650i2

The CCL 650i2 is a dual 3MP Display solution. It offers a full diagnostic workstation on one screen. This increases flexibility and improves workflow. With high luminance and high contrast, and an integrated color calibration function, our CCL 650i2 delivers highly accurate color reproduction faithful to the DICOM GSDF. The CCL 650i2 includes a luminance compensation feature for edge to edge consistency and is fully configurable for multi-display applications.

Applications

Angio Thorax CR PET / CT CT / MR

 

 

 

Options
Farbmonitor, Helligkeit, Color monitor

Colour monitors

TOTOKU colour monitors are ultra bright and rich in contrast.

Sensors-integrated

Sensors

Three different sensors permanently monitor the status of i2 models.

Integrierte Lut, 16 Bit LUT

16 Bit LUT

The built-in LUT selects the most appropriate 256 shades of gray (8bit) out of 1021 shades (10bit) to realize finer and smoother grayscale.

Remote-Kalibrierung

Remote-Kalibrierung

With the TOTOKU Software solutions and remote management you become the QA expert. The Medivisor suite makes calibration and testing as simple as possible. With PM Medivisor you enleash the full remote functionality.
All remote features are so advanced that you don't even get noticed. The integrated front sensor checks constantly the image quality. This data is send to the server and avaiable by a webinterface you can access from any workstation.

DICOM

DICOM preset - for improved perception

The display come with a correction curve, which is stored as DICOM preset and can be activated via the menu. The image quality is thereby noticeably improved.

More about DICOM preset

Dreifarbige LED-Anzeige, LED Signal, LED Status

Tricolor LED indicator

A glance at the LED indicator tells you the display's current operating status in three distinct colors. When in normal mode (luminance is stabilized), the LED is not lighted to minimize negatively impacting the diagnostic interpretation.

 

LED Backlight

LED Backlight

The latest generation of TOTOKU monitors is equipped with an LED backlight. The LED backlight ensures a better and more consistent illumination of the entire display in the CCL 258i2, CCL 358i2, CCL 650i2 and MS55i2 models. The power consumption of these monitors is also reduced by around 20% compared to models with conventional lighting. 

Eco-frindly, LED-Backlight, Umweltfreundlich, Energy saving

Eco-frindly

LEDs contain no mercury or other harmful elements. This makes disposal easy.

 

 

Uniformity Equalizer

Uniformity-Equalizer

The uniformity equalizer ensures excellent brightness distribution over the entire display surface and even eliminates minimal fluctuations in luminance. In the case of colour monitors, the uniformity equalizer also provides an even distribution of colours over the entire screen

Zertifiziert, EN 60601-1, EN 60601-1-2, certified

Certified

Security certified according to the EN 60601-1 and EN 60601-1-2 standards.



Technical Data

Technical Data - TOTOKU CCL 650i2

CCL 550i2
Application Ultrasound, CT, MRI and digital mammography on a single screen.
All-in-one solution for multi modality visualization..
Display
Technology TFT Active Matrix color IPS
LED backlighting Yes
Display size 21.3“ (54,1 cm)
Resolution (native) 2048 x 2560 (5 MP)
Pixel spacing 0,165 mm x 0,165 mm
Color reproduction via DVI-D 16.77 million colours from a palette of 280 trillion colours
Color reproduction via DisplayPort 1,1 billion colours
Maximum brightness 1000 cd/m2
Factory calibration 500/ 410 cd/m2
Contrast ratio 1300:1
Angle h: 170 ° / V: 170 °
Stabilization λ-Sentinel II (integrated sensors)
Life backlight 40.000 h / 320 cd/m²
Protective glass yes
Portrait function yes
Connections
Signal inputs DVI-D (1.0), DisplayPort (1.1a)
USB Hub USB 2.0, 1x up / down 2x
General unit data
Power consumption 95 W
Power save mode yes
Power supply 100 - 240 V, 50/60 Hz internal power supply
Dimensions in landscape mode W: 475 | H: 483 - 544 | D: 220
Dimensions in portrait mode W: 390 | H: 525 - 587 | D: 220
Functions monitor stand tilt rotate / height adjustable
Attachment 100mm VESA standard 100x200 mm VESA
Security lock slot yes
Weight with stand approximately 12 kg
Weight without stand approximately 8 kg
Approvals ANSI/AAMI ES60601-1(2005) +A1(2012), CAN/CSA-C22.2 No. 60601-1(2008), CE, FCC-B, ICES-003-B, VCCI-B, FDA510(k) Pending, J-Moss, RoHS
Warranty (bring-in) 5 years
Options
Remote calibration With software TOTOKU PM Medivisor (optional)
Uniformity Correction Factory Uniformity Correction possible before delivery New correction with calibration kit CAL008 (optional)
Downloads

Downloads

adjustable standConnectorTOTOKU CCL 650i2 leftTOTOKU CCL 650i2TOTOKU CCL 650i2 FrontTOTOKU CCL 650i2 BackMonitor stand tillt rotateTOTOKU CCL 650i2

You would like to get detailed information? More about the Free Info Package.

 

Test the TOTOKU diagnistic display in your environment

We would be glad to present you the TOTOKU diagnistic display on location. Further you have the opportunity to run the devices in your daily clinic routine during a test phase.

medical All-In-One Computer

provides maximum flexibility for OR integration

Medical keyboard and mouse

Imprint  |  § Terms & Conditions
 |  Phone: +49 2161 / 6984-0
 |  Last Update: 10.03.2016 16:51